V6 Exige Upper Rear Wishbone

Be the first to write a review

V6 Exige Rear Upper Wishbone.

The rear upper wishbone on the V6 Exige is not handed, so this wishbone is suitable for both left hand and right hand rear upper.

This high specification replacement wishbone is fabricated from top quality CDS (Cold Drawn Steel) instead of ERW (Electrical Resistance Welded) tube which has a welded seam along the centre.

CDS is stronger than ERW as there is no seam so we can reduce the wall thickness without reducing the strength.

TIG (Tungsten inert gas) welded rather than the messy MIG (Metal Inert Gas) which forms a stronger bond to the metals and gives a cleaner pristine finish.

TIG welding is less prone to stress cracking and distortion whereas MIG welding can cause porosity which can weaken the joints.

This takes more than twice as long to TIG weld the wishbones but we think it is worth the extra benefits TIG welding gives.

Once the wishbones have been welded they are then Nickel plated then Zinc passivated for corrosion resistance similar to the original wishbones.

Fitted with New Lotus Original Equipment EP OEM Specification bushes pre-installed